.png){kind=spacer}
CERTIFICATES / TEST REPORTS
CERTIFICATES OF CONFORMITY of combat ballistic helmets with TOR and TOR-D requirements DSTU 8835:2019
( 1st class of protection) , 2024
Tests conducted in January 2024
According to the results of testing helmet samples (Test Protocol No. 4632/2024 dated January 15, 2024 and Test Protocol No. 4685/2024 dated January 17, 2024), it was confirmed that the "TOR" and "TOR-D" helmets meet the requirements of DSTU 8835:2019 for the 1st protection class.
CERTIFICATES OF CONFORMITY for TREVIX ballistic protective goggles and goggles-masks requirements
Technical specifications of the Ministry of Defense of Ukraine , 2024
Випробування проведені в квітні-червні 2024 року
According to the results of testing of eyewear samples (test protocols No. 1411-E dated 06/25/2024, No. 154/2024 dated 04/22/2024, No. 10.1-6575 dated 04/23/2024, No. 2024.00.05.27.04 dated 06/27/2024), it was confirmed that TREVIX ballistic protective glasses meet the requirements of the Technical Standard of the Ministry of Defense A01XJ.24266-187:2019 (01)
According to the results of testing samples of goggles-masks (test protocols No. 1008-E dated 05/16/2024,
No. 182/2024 dated 06.08.2024, No. 10.1-6589 dated 13.05.2024, No. 2024.00.05.16.06 dated 16.05.2024) it is confirmed that TREVIX ballistic protective goggles-masks meet the requirements of the Technical Standard of the Ministry of Defense A01XJ.32012-188:2019 (01)
Test protocol for compliance of TOR-D helmets with the international standard NJI 0106.01 Level IIIA
The tests were conducted in June 2020 at the Chesapeake Testing ballistics laboratory (Belcamp, Maryland, USA).
According to the results of testing 6 samples, it was found that
TOR-D helmets manufactured by UaRms fully comply with protection level IIIA according to the NIJ 0106.01 standard.
ISO 9001:2015 Quality Management System Certificate
Certificate number GIUA-0002-QC
The ISO 9001:2015 Quality Management System Certificate confirms that, based on an independent international audit, the production and sale of the following products: TREVIX ballistic masks, "TOR" and "TOR-D" ballistic helmets, "BLOK" ballistic protection and other products fully meet all the necessary requirements for this certification.
The certificate was issued on January 17, 2019, confirmed and extended on February 23, 2024, valid until January 16, 2026.
REPORT on the results of tests to determine the protection class of the TREVIX ballistic mask glass in accordance with
to NATO standard STANAG 2920. Test conducted on 05/30/2017 in the ballistic laboratory Beschussamt Mellrichstadt (Germany):
The main test results recorded in the Report:
On 05/30/2017, the TREVIX ballistic mask was tested at the German ballistic laboratory Beschussamt Mellrichstadt to determine the class in accordance with the NATO standard STANAG 2920 .
When fired with a 3.6 mm FSP bullet weighing 0.375 grams, the mask showed a V50 level (minimum fragmentation velocity V50 m/s) = 280.2 m/s (ability to resist damage with a probability of 50%)
REPORT on the results of tests to determine the protection class of the TOR-D helmet against fragments in accordance with NATO standard STANAG 2920. The test was conducted on 05.03.2017 in the ballistic laboratory of the MORATEX Institute (Poland):
Основні результати випробувань, зафіксовані в Звіті:
On 05/03/2017, the "TOR" bulletproof helmet was tested at the Polish Moratex ballistic laboratory (Lodz) to determine the class of protection against fragments in accordance with the NATO standard STANAG 2920 .
When firing an FSP fragment simulator weighing 1.102 grams (17 grains), the TOR helmet showed a V50 level (minimum fragmentation velocity V50 m/s) = 698.8 m/s (ability to withstand damage with a probability of 50%), which corresponds to the maximum protection level F6 ( STANAG 2920 Protection Levels ) , on the basis of which the V50 indicator should not be
less than 650 m/s.
REPORT on the results of tests to determine the protection class of the TOR helmet against fragments in accordance with the NATO standard STANAG 2920. The test was conducted on 07/30/2015 in the ballistic laboratory of the Beschussamt Mellrichstadt (Germany):
